Naren Electrix Motor Protection Relays For Monoblock/Openwell Submersible Pumps Model DMC-1

Sold By : Naren supratech

3,000.00

25% Off
Close
Price Summary
  • 4,000.00
  • 3,000.00
  • 25%
  • 3,000.00
  • Overall you save 1,000.00 (25%) on this product
In Stock
Highlights:

Naren Electrix Motor Protection Relays For Monoblock/Openwell Submersible Pumps Model DMC-1

Compare
Estimated Delivery:
27 July - 30 July
70 People viewing this product right now!
Guaranteed Safe Checkout Trues Badge
Category: Brand:
Description

Product description
Features:

Overload Protection
Dry Run (Under Current) Protection
Tank Full OFF
Motor OFF Timer
Elapsed time indication
Motor Cable Cut Protection
User Adjustable Overload and Dry Run Settings
Digital Ammeter
Digital Voltmeter
Error Display on LCD
Metal Body
Connector type design
Motor ON Indication
Easy Setup and Installation

This product is a motor protection system with in-built motor starter that safeguards the Single Phase Monoblock and Openwell Submersible Motors against Overload and Dry Run. This product also has an OFF timer that can be adjusted by the user. It also offers a feature of turning OFF of the motor when the overhead tank is full. DMC-1 allows the motor load to pass through the CT provided to sense the current . The current drawn by the motor is continuously monitored and displayed on the LCD. The low current and high current settings need to be adjusted by the user. The motor is turned OFF in case of over current, under current (dry run) and when any of the supply phases are absent thus protecting the motor from damages. The reason for the trip is displayed on the LCD. The sensors are provided additionally which when connected to the overhead tank, turns OFF the motor starter when the water fills up. The switch provided on the device can be used to turn ON/OFF the motor.

Maximum Current Range:

30A

Connections:

For Monoblock Pumps

Connect the incoming power supply lines 220V to connectors 1 and 2 respectively (load wires).
Connect the motor cables to connectors 3 and 4 respectively (load wires).
Connect the sensor wires to the connectors 5 and 6 (polarity does not matter)

For Openwell Submersible Pumps :

Connect the incoming power supply lines 220V to connectors 1 and 2 respectively (load wires).
Connect the motor cables to the motor starter
Connect 3 and 4 to the incoming of your motor starter (load wires)
Keep the MCB on the starter always in the ON position
Connect the sensor wires to the connectors 5 and 6 (polarity does not matter)

Operation:

The LCD powers up automatically when the supply voltage is given. The motor can be turned ON by pressing the switch on the device. The same switch can be used to turn OFF the motor. While the motor is running, the device safeguards the motor against Overload and Dry Run besides the timing OFF. The sensors are provided as part of the package. If the sensors are connected and placed in the tank, the motor is also turned OFF as soon as the tank fills up. The elapsed time is displayed on the LCD. If the OFF timer is not required, please turn the OFF timer knob completely towards the left hand side.

Technical Specifications:

Wire Size to be used for Connectors 1,2,3 and 4 is a minimum of 1.5 sq. mm
The other wire sizes need to be minimum of 0.5 sq mm

Tripping time:

Overload – 12 seconds
Dry Run (Underload) – 8 seconds
Maximum OFF Time – 120 Minutes

Setting:

Turn the Overload [H( )] [green knob] to maximum (clockwise)
Turn the Dry Run [L( )] [Blue knob] to minimum (anticlockwise)
Turn ON the motor and observe the load current in the second line of the LCD
Set the Overload H( ) value to 2 points more than the load current by rotating and observing the change in H( ) value in the first line of the LCD.
Set the Dry Run L( ) value to 2 points less than the load current by rotating and observing the change in L( ) value in the first line of the LCD.
Motor OFF Timer is the first knob. If the timer is not required, turn it completely towards the left hand side.
If the OFF timer needs to be set, turn the white knob on the right hand side to increase the time which can be seen on the far right inside the brackets on the second line of the LCD
The numbers appearing next to the current reading outside the brackets are the time elapsed.
Note: Set the L( ) value to minimum if the Dry Run Protection is not required.

Cyclic Timer Settings:

Press set key to enter the timer settings
Observe the cursor blinking in the ON time
Press increase key (on right hand side) to increase the timings (HH:MM:SS)
Press decrease key (on left hand side) to decrease the timings (HH:MM:SS)
After the ON time is set, press Set button
Observe the cursor blinking in the OFF time
Press increase key (on right hand side) to increase the timings (HH:MM:SS)
Press decrease key (on left hand side) to decrease the timings (HH:MM:SS)
Press Set again to save the timings and exit the settings

Settings to select timer mode:

Power OFF the device
Press and hold the increase and decrease key together
Power ON the device
Release the key as soon as the setting mode prompts
Press increase key to select between Cut Off Mode / Cyclic mode
Press Set button again to save and exit the menu
Note: Set the L( ) value to minimum if the Dry Run Protection is not required.

Application:

Naren DMC-1 is used in all Single Phase Monoblock and Openwell Submersible pumps as a protection mechanism to protect the motor against current and voltage irregularities. This device effectively switches OFF the motor in any irregularity and hence prevents burning of the motor windings. The reason for turning OFF is displayed on the LCD which makes the diagnosis easy. The motor safeguarding devices like these are very critical which will save the users from the costs incurred due to motor failures. This product also doubles as a water protection mechanism as the motor is automatically turned OFF as soon as the tank fills up.

WARRANTY:

This product carries a warranty of 6 months from the date of purchase. Any issues within the warranty period will be attended to free of cost at our works in Bangalore. Post the warranty period, the product will be eligible for the paid service at our works. The invoice copy acts as a warranty card. The shipping of the product for repair will have to be done by the consumer.

Reviews (0)
0 ★
0 Ratings
5 ★
0
4 ★
0
3 ★
0
2 ★
0
1 ★
0

There are no reviews yet.

Be the first to review “Naren Electrix Motor Protection Relays For Monoblock/Openwell Submersible Pumps Model DMC-1”

Your email address will not be published. Required fields are marked *

More Products

Naren Electrix Control Starters For Single Phase Analog Starters Model SP-RG 1.5HP With Auto Start

Sold By : Naren supratech
Highlights:

Naren Electrix Control Starters For Single Phase Analog Starters Model SP-RG 1.5HP With Auto Start

4,350.00 25% Off

Naren Electrix Cyclic Timers For 3 Phase Cyclic Timer 440V (DOL/Save/Mins) 5 digit

Sold By : Naren supratech
Highlights:

Naren Electrix Cyclic Timers For 3 Phase Cyclic Timer 440V (DOL/Save/Mins) 5 digit

2,400.00 25% Off

Naren Electrix Auto Start Units For Single Phase Model CONT-23 (Upto 3HP)

Sold By : Naren supratech
Highlights:

Naren Electrix Auto Start Units For Single Phase Model CONT-23 (Upto 3HP)

1,575.00 25% Off

Naren Electrix Mobile Controllers For 3 Phase Smart Connect 3 Phase 4G (All Mobile Networks)

Sold By : Naren supratech
Highlights:

Naren Electrix Mobile Controllers For 3 Phase Smart Connect 3 Phase 4G (All Mobile Networks)

11,180.00 35% Off

Naren Electrix Control Boards Without Starter Model CB2 (7.5HP)

Sold By : Naren supratech
Highlights:

Naren Electrix Control Boards Without Starter Model CB2 (7.5HP)

2,400.00 25% Off

Naren Electrix Control Starters For Single Phase Digital Starters Model ODOLR 1HP

Sold By : Naren supratech
Highlights:

Naren Electrix Control Starters For Single Phase Digital Starters Model ODOLR 1HP

6,675.00 25% Off

Recently Viewed

Scroll To Top
Close
Close
Close

My Cart

  • × TOTAL TOOLS SCREDRIVER BIT TAC16PH223
    TOTAL TOOLS SCREDRIVER BIT TAC16PH223
    Vendor:

    Total Tools

    1 × 346.00
  • × TOTAL TOOLS DRY DIAMOND DISC TAC2111003
    TOTAL TOOLS DRY DIAMOND DISC TAC2111003
    Vendor:

    Total Tools

    1 × 197.00
  • × INGCO ACN50401 2 In 1 combo brad nailer
    INGCO ACN50401 2 In 1 combo brad nailer
    Vendor:

    Ashirwad Exports

    1 × 3,024.00
  • × Balwaan BX-212 Bare Engine 6.5HP MTAK-EN-PO-6062
    Balwaan BX-212 Bare Engine 6.5HP MTAK-EN-PO-6062
    Vendor:

    Balwaan

    1 × 10,185.00
  • × TOTAL TOOLS AIR RATCHET WRENCH TAT10121
    TOTAL TOOLS AIR RATCHET WRENCH TAT10121
    Vendor:

    Total Tools

    1 × 4,646.00
  • × Naren Electrix Cyclic Timers For Monoblock/Openwell Pumps Cyclic Timer Jet Type
    Naren Electrix Cyclic Timers For Monoblock/Openwell Pumps Cyclic Timer Jet Type
    Vendor:

    Naren supratech

    1 × 2,700.00
  • × TOTAL TOOLS CENTRIFUGAL PUMP TWP215006
    TOTAL TOOLS CENTRIFUGAL PUMP TWP215006
    Vendor:

    Total Tools

    1 × 14,408.00
  • × INGCO HTS0410 Tin snip
    INGCO HTS0410 Tin snip
    Vendor:

    Ashirwad Exports

    1 × 483.00
  • × TOTAL TOOLS SLOTTED GO THROUGH SCREWDRIVER
    TOTAL TOOLS SLOTTED GO THROUGH SCREWDRIVER
    Vendor:

    Total Tools

    1 × 238.00
  • × Naren Electrix Auto Start Units For Monoblock Model Mono 220V
    Naren Electrix Auto Start Units For Monoblock Model Mono 220V
    Vendor:

    Naren supratech

    1 × 570.00
  • × Balwaan BP 850e Power Weeder Black Bull - (Electric Start) (Diesel) MTAK-EN-PO-6007
    Balwaan BP 850e Power Weeder Black Bull - (Electric Start) (Diesel) MTAK-EN-PO-6007
    Vendor:

    Balwaan

    1 × 62,469.00
  • × INGCO HCB0501 Hole core bit
    INGCO HCB0501 Hole core bit
    Vendor:

    Ashirwad Exports

    1 × 756.00
  • × TOTAL TOOLS HYDRAULIC STEEL CUTTER BLADE THSC012B
    TOTAL TOOLS HYDRAULIC STEEL CUTTER BLADE THSC012B
    Vendor:

    Total Tools

    1 × 1,078.00
  • × INGCO HHK11092 Hex key
    INGCO HHK11092 Hex key
    Vendor:

    Ashirwad Exports

    1 × 435.00
  • × INGCO DM36002 Digital multimeter
    INGCO DM36002 Digital multimeter
    Vendor:

    Ashirwad Exports

    1 × 1,388.00
  • × Naren Electrix Motor Protection Relays For Monoblock/Openwell Submersible Pumps Model DMC-CT
    Naren Electrix Motor Protection Relays For Monoblock/Openwell Submersible Pumps Model DMC-CT
    Vendor:

    Naren supratech

    1 × 3,300.00
  • × Naren Electrix Control Starters For 3 Phase Digital Starters DOL-Type Model DOLDS (10HP)
    Naren Electrix Control Starters For 3 Phase Digital Starters DOL-Type Model DOLDS (10HP)
    Vendor:

    Naren supratech

    1 × 9,100.00
  • × INGCO HKTS14462 46 Pcs 1/4" socket set
    INGCO HKTS14462 46 Pcs 1/4" socket set
    Vendor:

    Ashirwad Exports

    1 × 2,141.00
  • × Naren Electrix Water Level Controllers WLC with RTC (Clock Time Specific) WLCRT20 Mono
    Naren Electrix Water Level Controllers WLC with RTC (Clock Time Specific) WLCRT20 Mono
    Vendor:

    Naren supratech

    1 × 5,100.00
  • × INGCO ALS2001 Trimmer line
    INGCO ALS2001 Trimmer line
    Vendor:

    Ashirwad Exports

    1 × 893.00
  • × Balwaan Seeder Single Barrel S-1 MTAK-MA-HA-5309
    Balwaan Seeder Single Barrel S-1 MTAK-MA-HA-5309
    Vendor:

    Balwaan

    1 × 1,619.00
  • × INGCO AKDB1195 HSS twist drill bits set
    INGCO AKDB1195 HSS twist drill bits set
    Vendor:

    Ashirwad Exports

    1 × 942.00
  • × TOTAL TOOLS CABLE STRIPPING KNIFE THT51881
    TOTAL TOOLS CABLE STRIPPING KNIFE THT51881
    Vendor:

    Total Tools

    1 × 333.00
  • × INGCO CCVLI202301 Cordless concrete vibrator
    INGCO CCVLI202301 Cordless concrete vibrator
    Vendor:

    Ashirwad Exports

    1 × 4,342.00
  • × TOTAL TOOLS 27 PCS 1/4" SOCKET SET THT141271
    TOTAL TOOLS 27 PCS 1/4" SOCKET SET THT141271
    Vendor:

    Total Tools

    1 × 1,829.00
  • × "Balwaan 6"" Planter Single Sprial MTAK-AC-EA-5512"
    "Balwaan 6"" Planter Single Sprial MTAK-AC-EA-5512"
    Vendor:

    Balwaan

    1 × 922.00
  • × INGCO HCC0841218 Concrete chisel
    INGCO HCC0841218 Concrete chisel
    Vendor:

    Ashirwad Exports

    1 × 364.00
  • × TOTAL TOOLS CONTROL BOX TWP55501-SB
    TOTAL TOOLS CONTROL BOX TWP55501-SB
    Vendor:

    Total Tools

    1 × 1,568.00
  • × INGCO CRSLI1152 Cordless reciprocating saw
    INGCO CRSLI1152 Cordless reciprocating saw
    Vendor:

    Ashirwad Exports

    1 × 4,092.00
  • × TOTAL TOOLS AUTOMATIC WIRE STRIPPER THT15246
    TOTAL TOOLS AUTOMATIC WIRE STRIPPER THT15246
    Vendor:

    Total Tools

    1 × 1,139.00
  • × Naren Electrix PCBs & Spares Contactors N-MU1 4 Pole 16A
    Naren Electrix PCBs & Spares Contactors N-MU1 4 Pole 16A
    Vendor:

    Naren supratech

    1 × 1,950.00
  • × TOTAL TOOLS KNAPSACK SPRAYER THSPP41602
    TOTAL TOOLS KNAPSACK SPRAYER THSPP41602
    Vendor:

    Total Tools

    1 × 2,423.00
  • × TOTAL TOOLS METAL CUTTING DISK TAC2211001SA
    TOTAL TOOLS METAL CUTTING DISK TAC2211001SA
    Vendor:

    Total Tools

    1 × 45.00
  • × INGCO HQBC01601 Quick bar clamp
    INGCO HQBC01601 Quick bar clamp
    Vendor:

    Ashirwad Exports

    1 × 398.00
  • × Balwaan BS 20M Manual Sprayer (Gold Series) MTAK-MA-SP-5595
    Balwaan BS 20M Manual Sprayer (Gold Series) MTAK-MA-SP-5595
    Vendor:

    Balwaan

    1 × 2,135.00
  • × Balwaan Chaff Cutter CH-120 (With Motor) MTAK-EL-CH-5505
    Balwaan Chaff Cutter CH-120 (With Motor) MTAK-EL-CH-5505
    Vendor:

    Balwaan

    1 × 28,000.00
  • × INGCO CGSLI20851 Cordless chain saw
    INGCO CGSLI20851 Cordless chain saw
    Vendor:

    Ashirwad Exports

    1 × 6,271.00
  • × Naren Electrix Motor Protection Relays For 3 Phase Model UCOCR-2 (0-50A)
    Naren Electrix Motor Protection Relays For 3 Phase Model UCOCR-2 (0-50A)
    Vendor:

    Naren supratech

    1 × 3,300.00
Naren Electrix Motor Protection Relays For Monoblock/Openwell Submersible Pumps Model DMC-1
Naren Electrix Motor Protection Relays For Monoblock/Openwell Submersible Pumps Model DMC-1
3,000.00 Add to cart

Select at least 2 products
to compare