Product description
Suitable for 3 Phase Pumps
Rating: 7.5HP
Type: DOL
₹2,400.00 ₹3,200.00
Naren Electrix Control Boards Without Starter Model CB2 (7.5HP)
Product description
Suitable for 3 Phase Pumps
Rating: 7.5HP
Type: DOL
Naren Electrix Single Phase Preventors Current Sensing Type Model SP3 ( 5 to 12.5HP)
Naren Electrix Capacitors Motor Start Capacitors 200/250 MFD
Naren Electrix Mobile Controllers For Monoblock/Openwell Pumps Smart Connect Jet Type (All Mobile Networks Except Jio)
Naren Electrix Motor Protection Relays For 3 Phase Model MPR (1 to 5HP)
Naren Electrix Control Starters For Single Phase Analog Starters Model SP-RG 3HP With Auto Start
Naren Electrix Auto Start Units For 3 Phase Model S1
Naren Electrix Multifunction Timers For Single Phase Multifunction Timer – RTC with Duration (CONT)
Naren Electrix Water Level Controllers For Single Phase Model WLC-20 3 Phase With Cyclic Timer
Naren Electrix Control Starters For 3 Phase Digital Starters DOL-Type Model DOLDS (1 to 5 HP) With Auto Start
Naren Electrix Multifunction Timers For Lighting Loads Multifunction Timer – RTC with Cyclic Timer (Jet Type) (Alternate Load) 3KW
Naren Electrix Control Starters For Single Phase Digital Starters Model ODOLR 1HP With Cyclic Timer
Naren Electrix Control Starters For 3 Phase Digital Starters DOL-Type Model DOLDS (3 to 7.5 HP)
Naren Electrix Control Starters For 3 Phase Digital Starters DOL-Type Model DOLDS (1 to 5 HP)
Naren Electrix Multifunction Timers For 3 Phase Multifunction Timer – RTC with Duration With PFR
Naren Electrix Multifunction Timers For Monoblock/Openwell Pumps Multifunction Timer – RTC with Cyclic Timer (Jet Type)
Naren Electrix Multifunction Timers For 3 Phase Multifunction Timer – RTC with Cyclic Timer With PFR (2 motors)
Naren Electrix Control Starters For Single Phase Digital Starters Model ODOLR 3HP With Cyclic Timer
Naren Electrix Water Level Controllers For 3 Phase Model WLC-20 3 Phase With Cyclic Timer
Rated voltage(V):220-240
Rated frequency(Hz):50
Max.output(kW):3.0
Rated output(kW):2.8
Rated speed(rpm):3000
Engine:4 stroke,OHV
Displacement(mL):210
Cooling system:Air-cooled
Ignition system:T.C.I
Starting system:Recoil+Electric
Aluminum coil alternator
Fuel tank(L):15
Dry weight(kg):46.5
Packed by carton box
Impact Screwdriver bit
PH2,250mm,1pcs
S2 industrial steel
Black surface with magnet
Packed by double blister
Load capacity:100Pcs
Brad size:15-50mm
Ga18,1.25X1.0mm
Staple size:16-40mm
Ga18,1.25X1.0mm
Staple crown:5.7mm
With Europe type connector, USA type connector, Nitto type connector and Italy type connector.
Operation pressure:0.4-0.7Mpa(60-100Psi)
With 1000pcs brad nails
With 1000pcs staples
Packed by color box
Voltage:20V
Maximum speed :1400rpm
Blade length:450mm?18″?
Maximum cutting diameter:18mm
With 1pcs battery pack
With 1pcs fast charger
Charge volts:220V-240V~50/60Hz
Packed by color box
Size?
8″ Combination pliers
6″ Long nose pliers
6″ Diagonal cutting pliers
Cr-V,black finish and polish
Two color handle
Packed by PP hanger
Impact Screwdriver bit
PH1,100mm,1pcs
S2 industrial steel
Black surface with magnet
Packed by double blister
115 Pcs Tools Set
1 Pcs 680W Impact Drill?TG1061356?
220-240V~50/60Hz,13mm Key Chuck
Include?
1 Pcs 8Oz Claw Hammer
1 Pcs 7? Combination Pliers
1 Pcs 6″ Adjustable Wrench
1 Pcs SL5.5×100 Screwdriver
1 Pcs PH1x100 Screwdriver
1 Pcs 3M Steel Measuring Tape
4 Pcs Wood Drill bits 4,5,6,8mm
5 Pcs Twist Drill bits 2,3,4,5,6mm
5 Pcs Masonry Drill bits 4,5,6,8,10mm
1 Pcs 9mm Snap-off Blade Knife
10 Pcs Screwdriver bits SL3/SL4/SL5/SL6/PH0/PH1/PH2/PH3/PZ0/PZ1;
1 Pcs Magnetic bits Holder
1 Pcs Test Pencil
1 Pcs Pvc Insulation Tape
40 Pcs Screws(20pcs*ST3.5,10pcs*ST4,10pcs*ST5)
40 Pcs Plastic plugs(20pcs*5mm,10pcs*6mm,10pcs*8mm)
Packed by BMC + Color box
Range:0~9999ppm(methane)
Detecting gas:Combustible gas
Accuracy:? 5% FS(methane)
Sensitivity:?50ppm(methane)
Response time:?2sec
Warm-up time:Approx 120sec
Display?LCD
Flexible probe:450mm
Packed by color box
Impact Screwdriver bits
PH2,25mm,2pcs/set
S2 industrial steel
Black surface with magnet
Packed by double blister
HSS,diameter:4.0mm
Total length:75mm
Usable length:43mm
10pcs/poly bag
Packed by poly bag
Size:10-45mm
Step:10-15-20-25-30-35-40-45mm
Shank:round shank
Titanium finishing
Material:HSS 4341
Packed by double blister
Weight:100g
Drop-forged hammerhead
Heat treatment, 45# carbon steel
TOTAL Style Fiberglass handle
Packed by Label
Voltage:20V
No-load speed:0-400/0-1500/min
Max.torque:45NM
Chuck capacity:0.8-10mm
Torque settings:15+1
Auto-lock keyless chuck
Mechanical 2-speed gear
Spindle lock function
20V Lithium-Ion 2.0Ah batteries
With 1pcs battery pack
With 1pc 1Hr fast charger
Charge Volts:110V-240V~50/60Hz
Integrated work light
LED battery power indicator
Packed by color box
Voltage: 20V
Lithium-Ion 4.0Ah battery pack
LED battery power indicator
One battery fits all P20S multiple tools
Packed by color box
Brushless Motor
Voltage:20V
No-load speed :0-18500rpm
Average air volume:8.5m3/min
Maximum air speed:144km/h
Variable speed control
Battery and charger sold separately
Packed by color box
Get access to your Orders, Wishlist and Recommendations.
Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.
There are no reviews yet.